- Adhesive Paint Line Protector for super sharp paint lines!
- It removes cleanly for up to 14 days and does not cause surface damage.
- Suitable for painting, home and office projects.
- Great for use on skirting boards and dado, metal and glass.
30m x 24mm Tape
Roll dimensions: 10.3x10.3x2.4cm，75g
Material: crepe paper
1) Clean Surface
The surface should be clean, dry and dust-free so the tape sticks properly.
2) Apply Tape
Lay tape onto the surface, pressing down as you go. Don’t stretch the tape, or it may lift or break.
3) Secure Tape
Press tape down firmly with a smooth edge, like a putty knife or credit card.
4) Let Tape Set
Wait about 30 to 60 minutes before you begin painting.
Wait until the paint is dry to the touch before removing the tape. Check the paint can for the manufacturer's dry times.
Use a putty knife or razor blade to score along the edge of the tape. This prevents paint from being pulled up with the tape and from cracking along the paint line.
3) Remove Tape
Taking your time, lift up the painter’s tape and pull it back on itself, removing at a 45 degree angle. If adhesive sticks to the surface, try a 90-degree angle.